T-103 CORAL EXTRA HIGH GLOSS THINNER

09 Jun T-103 CORAL EXTRA HIGH GLOSS THINNER

Coral Extra High Gloss thinner is a slow to moderate evapourating thinner. It is recommended for primers and nitrocellulose auto enamels. It is compatible with film forming paint products with cellulose acetate butyrate, alkyd/nitrocellulose, or polyester resins.

Physical Data

Colour : clear.
Appearance : clear liquid.
VOC content : 100%
Flash point : >45 deg
Boiling point : 121 deg

How to Use

Gradually add 10-15% of Coral Extra High Gloss thinner is to achieve the desired application viscosity. Clean oil and grease from surfaces to be painted using Coral Extra High Gloss thinner. Remove impurities such as projecting parts, residual oil, rust etc

WARNING

Coral Extra High Gloss thinner is highly flammable solvent and should be used in a well-ventilated area. Vapours may cause flash fire. Do not smoke. Extinguish all flame and others sources of ignition during application and until all vapoursare gone. Prevent build-up of vapors by opening all windows and doors to archive cross-ventilation. Do not empty into drains. * (limited evidence). To clean the floor and all objects contaminated by this material use water and detergent. Keep away from food drink and animal feeding stuffs. If swallowed IMMEDIATELY contact Doctor.

FIRST AID

If you experience difficulty in breathing, leave the area to obtain fresh air.
If continued difficulty is experienced, get medical assistance immediately.
In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention. For skin, wash thoroughly with soap and water.
If swallowed, get medical attention immediately. Keep Out of Reach of Children.

Pack sizes : 1 litres, 5 litres and 200 Litres.