Coral acrylic thinner is a high purity solvent blend designed for use with all hydroxyl acrylic based coatings. It is suitable for use in 2K Acrylic enamels, Primers and clear over base.

Physical Data

Colour : clear.
Appearance : clear liquid.
VOC content : 100%
Flash point : Grades : Slow/ medium/fast

How to Use

When solvent based coatings are sprayed, high pressure at the nozzle forces the solvent within the coating to evaporate quickly. Therefore, to avoid cobwebbing (i.e. the coating drying immediately as it leaves the spray gun), extra solven it must be added. 2k Acrylic thinner should be used at a ratio of between 1:0.25 and 1:0.5 (Coating : Thinners depending upon the application. The thinned solution should be stirred thoroughly and allowed to stand for 10 minutes. All air bubbles must be allowed time to disperse before attempting to spray. Thinners should be added gradually until the desired spray viscosity. The surface to be coated must be clean, dry, free from dust dirt and grease. Remove impurities such as projecting parts, residual oil, rust etc.


2K Acrylic thinner is a flammable solvent blend and should be used in a wellventilated area. Vapours may cause flash fire. Do not smoke. Extinguish all flame and others sources of ignition during application and until all vapours are gone. Prevent build-up of vapors by opening all windows and doors to archive crossventilation.


If you experience difficulty in breathing, leave the area to obtain fresh air.
If continued difficulty is experienced, get medical assistance immediately.
In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention. For skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately. Keep Out of Reach of

Waste disposal

Materials and all related packaging must be disposed off in safe way in accordance with the requirement of local authorities.

Pack sizes : 1 litres, 5 litres and 200 Litres.