T-107 CORAL INDUSTRIAL THINNER

09 Jun T-107 CORAL INDUSTRIAL THINNER

Coral Industrial thinner is a general heavy-duty fast evaporating thinner. It is recommended for primers and also for Fast Dry auto enamels. It is recommended for thinning 1k acrylic, chlorinated rubber paint, antifouling composition, stoving enamels. Add 10-15% by volume of Coral Industrial thinner to desired application viscosity. Excess addition may lead to sagging. Coral Industrial thinner can be used for thinning paints, metal cleaning and cleanup of brushes after paint application works and equipment cleaning after painting; spray guns, paint lines, brushes, etc.

Physical Data

Colour : clear.
Appearance : clear liquid.
VOC content : 100%
Flash point : 25±2 deg.

How to Use

Gradually add 10-15% of Coral Industrial thinner is to achieve the desired application viscosity. Clean oil and grease from surfaces to be painted using Coral Industrial thinner. Remove impurities such as projecting parts, residual oil, rust etc

WARNING

Coral Industrial thinner is highly flammable solvent and should be used in a wellventilated area. Vapours may cause flash fire. Do not smoke. Extinguish all flame and others sources of ignition during application and until all vapours are gone. Prevent build-up of vapors by opening all windows and doors to archive crossventilation. Do not empty into drains. *(limited evidence). To clean the floor and all objects contaminated by this material use water and detergent. Keep away from food drink and animal feeding stuffs. If swallowed IMMEDIATELY contact Doctor.

FIRST AID

If you experience difficulty in breathing, leave the area to obtain fresh air.
If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention. For skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately. Keep Out of Reach of Children.

Pack sizes : 1 litres, 5 litres and 200 Litres.

Tags: